Devicyprin induced gonadal impairment in a freshwater food fish, Channa punctatus (Bloch)

Synthetic pyrethroids are the recent major class of broad spectrum, photostable, organic insecticides used in agricultural, domestic and veterinary applications and now account for more than 30% of global insecticide use. Cypermethrin is metabolized and eliminated significantly more slowly by fish than by mammals or birds, which may explain this compound's high toxicity in fish compared to other organisms. The present communication deals with histoanatomical alterations in the gonads of a local fresh water food fish, Channa punctatus exposed to 0.033 ppm (96 hr LC50 X 1/10) concentration of a synthetic pyrethroid, devicyprin (cypermethrin 25%) in aquatic medium of aged tap water for 15, 30 and 45 days respectively. In testis, exposure dependent histological damage has been observed in terms of vacuolization, condensation of spermatogonic cells, distortion of tubular epithelium, shrinkage of interstitial cells and general inflammatory responses. Longest exposure of 45 days has resulted in peculiar starry-sky appearance of the testicular tissue. Gross histo-anatomy of ovarian tissue reveals epithelial lesions, inflammatory responses, stromal hemorrhage, increased interstitium and shrinkage of yolk vesicles towards periphery These findings are quite suggestive of reproductive impairments leading to delayed gonadal maturity and adversely affecting processes of sperm production and ovulation and thus, the fish production.     

A Review on the Present Scenario of Air Quality Associated with Indian Mining Operations

Compositional changes to air quality from coal mining are not only the most visible impact from these activities on the environment, they can also immediately affect the health of mine professionals and adjoining populations. The presence of gases and suspended solids emitted by mining activities affects the human respiratory system and decreases production in mines. This article summarizes a case study of several Northern Coalfields Limited (NCL) coal mines with an emphasis on particulate matter (PM) to report the status of air quality connected to coal production and overburden removal. The concentrations of sulfur dioxide (SO₂), nitrogen oxides (NO_x), and suspended particulate matter (SPM) reported in the literature are also summarized in table form to allow comparisons to the permissible standards set by the Indian Central Pollution Control Board (CPCB) and other standards used around the world. An up‐to‐date status of air quality at coal mines is compared for mines located in different parts of India. Subsequently, all coal mines were divided into different classes in regard to the severity of their emissions. These classes are, in increasing order of severity, green, yellow, red, and black. SPM measurements were tabulated in regard to concentration and composition. Our article concludes with the recommendation that an environmental impact assessment (EIA) to be conducted to better characterize changes in the environment from mining emissions to develop integrated mitigation measures and to identify additional parameters to define air quality at mines.     

Dissolution of steel slags in aqueous media

Environmental Science and Pollution Research - Steel slag is a major industrial waste in steel industries, and its dissolution behavior in water needs to be characterized in the larger context of...     

Association of Streptomyces community composition determined by PCR-denaturing gradient gel electrophoresis with indoor mold status

Both Streptomyces species and mold species have previously been isolated from moisture-damaged building materials; however, an association between these two groups of microorganisms in indoor environments is not clear. In this study, we used a culture-independent method, PCR-denaturing gradient gel electrophoresis (PCR-DGGE), to investigate the composition of the Streptomyces community in house dust. Twenty-three dust samples each from two sets of homes categorized as high-mold and low-mold based on mold-specific quantitative PCR analysis were used in the study. Taxonomic identification of prominent bands was performed by cloning and sequencing. Associations between DGGE amplicon band intensities and home mold status were assessed using univariate analyses as well as multivariate recursive partitioning (decision trees) to test the predictive value of combinations of bands intensities. In the final classification tree, a combination of two bands was significantly associated with mold status of the home (p?=?0.001). The sequence corresponding to one of the bands in the final decision tree matched a group of Streptomyces species that included Streptomyces coelicolor and Streptomyces sampsonii, both of which have been isolated from moisture-damaged buildings previously. The closest match for the majority of sequences corresponding to a second band consisted of a group of Streptomyces species that included Streptomyces hygroscopicus, an important producer of antibiotics and immunosuppressors. Taken together, the study showed that DGGE can be a useful tool for identifying bacterial species that may be more prevalent in mold-damaged buildings.     

Metal toxicity assessment of mobile phone parts using Milli Q water

Environmentally safe disposal of end-of-life (EoL) or discarded mobile phone is a serious problem on account of their ever increasing number and toxic metals contents. In the present work, metal toxicity of mobile phone plastics, printed wire boards (PWBs) and batteries were assessed through dynamic batch leaching using Milli Q (MQ) water. Phone plastics failed Toxicity Characterization Leaching Procedure (TCLP) and Waste Extraction Test (WET) for Pb as the cumulative amount of Pb leached from plastics (5.33 mg/l) exceeded the regulatory limits (5.0 mg/l) used in characterizing a waste as hazardous. Similarly, the average cumulative amount (21.83 mg/l) of Ni leached from PWBs exceeded the regulatory limit of 20 mg/l and thus PWBs failed WET. Metals leached from batteries in small amounts (Cr: 0.40 mg/l and Ni: 0.15 mg/l). The presence of Fe in the batteries and its precipitation as oxides/hydroxides in the leaching solution hindered the leaching of other metals in MQ water. Both plastics and PWBs should be treated as hazardous waste and should not be disposed in open landfills. Further, MQ water leaching could provide good simulation of metals leaching from the mobile phones disposed at landfill sites.     

Contribution of point sources and non-point sources to nutrient and carbon loads and their influence on the trophic status of the Ganga River at Varanasi,India

To determine the possible contributions of point and non-point sources to carbon and nutrient loading in the Ganga River, we analyzed N, P, and organic carbon (OC) in the atmospheric deposits, surface runoff, and in the river along a 37-km stretch from 2013 to 2015. We also assessed the trophic status of the river as influenced by such sources of nutrient input. Although the river N, P, and productivity showed a declining trend with increasing discharge, runoff DOC and dissolved reactive phosphorus (DRP) increased by 88.05 and 122.7% between the Adpr and Rjht sites, indicating contributions from atmospheric deposition (AD) coupled with land use where agriculture appeared to be the major contributor. Point source input led to increased river concentrations of NO₃ ^?, NH₄ ⁺, DRP, and DOC by 10.5, 115.9, 115.2, and 67.3%, respectively. Increases in N, P, and productivity along the gradient were significantly negatively correlated with river discharge (p < 0.001), while river DOC and dissolved silica showed positive relationships. The results revealed large differences in point and non-point sources of carbon and nutrient input into the Ganga River, although these variations were strongly influenced by the seasonality in surface runoff and river discharge. Despite these variations, N and P concentrations were sufficient to enhance phytoplankton growth along the study stretch. Allochthonous input together with enhanced autotrophy would accelerate heterotrophic growth, degrading the river more rapidly in the near future. This study suggests the need for large-scale inter-regional time series data on the point and non-point source partitioning and associated food web dynamics of this major river system.     

Solar-driven technology for freshwater production from atmospheric air by using the composite desiccant material “CaCl<Subscript>2</Subscript>/floral foam”

In this communication, experiments have been performed to check the capability of the newly formed composite desiccant material (CaCl₂/floral) for the extraction of freshwater from atmospheric air. Three numbers of solar glass desiccant box type system (SGDBS) with a captured area of 0.36 m² each, have been used. The design parameters for the water production are height of glass from desiccant bed at 0.22 m, inclination in angle as 30°, the effective thickness of glass as 3 mm and number of glazing as single. The maximum yield by the new composite desiccant material is 0.35 ml/cm³/day. The efficiency of the system SGDBS with 37 % concentration of CaCl₂ is 76.44 %.     

Comparative study of solar-powered water production from atmospheric air using different desiccant materials

In this paper, experiments have been performed in order to determine the quantity of water produced from the atmospheric air using different desiccant materials named Silica gel, Activated alumina and Molecular sieve 13 X. On the bases of experimental results, a correlation is derived among the different temperatures and water production using Central Composite Design (CCD) of Response Surface Methodology. A newly designed solar glass desiccant box type system (SGDBS), three in number, has been used. Design parameters for the production of water has been taken as depth of material from the glass is 0.22 m, inclination in angle as 30°, effective thickness of glass as 3 mm and number of glazing as single. It has been found experimentally that the maximum quantity of water produced by Silica gel, Activated alumina and Molecular sieve 13 X is 160, 20 and 35 ml/kg/day, respectively. Whereas theoretically, value of water produced by the Silica gel, Activated alumina and Molecular sieve 13 X is 600, 28 and 60 ml/kg/day, respectively.     

Assessment of Ambient Air Quality in Urban Centres of Haryana (India) in Relation to Different Anthropogenic Activities and Health Risks

Considering the mounting evidences of the effects of air pollution on health, the present study was undertaken to assess the ambient air quality status in the fast growing urban centres of Haryana state, India. The samples were collected for total suspended particulate matter (TSPM), respirable suspended particulate matter (PM₁₀), sulfur dioxide (SO₂), and oxides of nitrogen (NO₂) during different seasons from 8 districts of Haryana during January, 1999 to September, 2000. The four types of sampling sites with different anthropogenic activities i.e. residential, sensitive, commercial and industrial were identified in each city. The ambient air concentration of TSPM and PM₁₀ observed was well above the prescribed standards at almost all the sites. The average ambient air concentrations of SO₂ and NO₂ were found below the permissible limits at all the centres. Comparatively higher concentration of SO₂ was observed during winter seasons, which seems to be related with the enhanced combustion of fuel for space heating and relatively stable atmospheric conditions. Air Quality Index (AQI) prepared for these cities shows that residential, sensitive and commercial areas were moderately to severely polluted which is a cause of concern for the residents of these cities. The high levels of TSPM and SO₂ especially in winter are of major health concern because of their synergistic action. The data from Hisar city reveals a significant increase in the total number of hospital visits/admissions of the patients with acute respiratory diseases during winter season when the level of air pollutants was high.